EWM Microplasma 25-2 PG Water Cooled Welding Machine DC Only

The EWM Microplasma 25-2 PG is a Microplasma welding machine with precision gas metering unit, water cooler, and Plasma and TIG functions. Includes 3.5m mains supply lead and EWM parts and labour warranty*.

Key Features:

• 0.3A-20A
• 230V
• Hysteresis-free precision gas metering unit for plasma gas and shielding gas with 15-start control valves to precisely set the gas flow rate. Recommended for precision welding even in the lower current range
• Plasma gas setting range 0.1 l/min to 1.1 l/min (tolerance +/- 2% from end value)
• Shielding gas setting range 3.5 l/min to 20 l/min (tolerance +/- 2% from end value)
• Microplasma welding machine with precision gas metering unit
• Plasma and TIG welding
• Plasma and pulsed TIG welding
• Plasma and pulsed TIG welding up to the kHz range allow a high welding speed with minimal heat input using a constricted arc
• Plasma and TIG welding current adjustable in 0.1 A increments
• Pilot arc current separately adjustable for start phase, welding phase, end-crater and welding break
• Temperature, flow and pressure monitoring for the coolant circuit
• Non-latched/latched operation
• Spot welding/tack function (spotArc/spotmatic)
• Adjustable up-slope and down-slope time
• Spotmatic – reduce the time required for tacking by up to 50% (TIG only)
• Adjustable gas pre- and post-flow time
• Non-interchangeable connections for all mediums
• Welding torch connection using quick connect coupling
• Connection capability for remote control
• Two system connections (e.g. for ewm Xnet)
• All control elements and connections for welding torches, remote controls and workpiece leads are directly accessible on the front of the machine
• Microplasma and Cool 50 MPW50, mobile with Trolly 55-6
• No additional mains connection required for cooling unit. Power supply to the Cool 50 MPW50 via the Microplasma
• Alternatively, at high currents, duty cycles and ambient temperatures, a separate recooling unit can be used (the recooling unit does not fit under the Microplasma or on the Trolly 55-6)
• Optional network connectivity with ewm Xnet software via LAN or WiFi gateway
• Always read the information in the operating instructions of the relevant welding torch and welding machine before carrying out any welding.

*Customer must register machine for warranty on EWM website.