Miller Dimension™ 650 CC/CV Multi-Process Welder 3-Phase

The Miller Dimension™ 650 CC/CV is developed for harsh environmental conditions and precise, power-intensive output requirements. Includes 3-year Miller True Blue Warranty.

Key Features:

• 650A
• 0.8-1.6mm solid and cored wires
• All-aluminium construction that helps the machine resist corrosion for a long life.
• Exclusive protection input inductor protects machine’s performance and reliability from “dirty” input power.
• Wind Tunnel Technology.™ – Internal air flow that protects electrical components and PC boards from dirt, dust, debris.
• Fan-On-Demand™ operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine.
• High electrical efficiency and excellent power factor mean that you can get more welding done using less power.
• Digital meters with SunVision™ technology enable welding parameters to be viewed with greater clarity than analogue meters — at virtually any angle. Meters can be seen clearly even in direct sunlight.
• Reduced size and weight – Weighing in at 71.7 kg (158 lb.), the Dimension 650 is 3.5 times lighter than the Dimension 652, making it easier to move around the shop, jobsite, or shipyard. Requires 40-percent less floor space.
• High-quality performance from power intensive to precise. Easy to fine tune the arc.
• Gouging mode provides 800 amps of usable power, a full 650 amps of power at 100-percent duty cycle. Perfect for heavy gouging with 10 mm carbons.
• Three wire modes (GMAW/FCAW/SAW) for simplified setup and optimized arc performance.
• Solid and flux-cored wires with gas offer exceptional short-arc MIG precision to weld thin metals with less risk of distortion or burn-through, and premium flux-cored welding with gas.
• Flux-cored (self-shielded) welding performance is exceptional, especially with wires commonly found in infrastructure construction.
• Sub arc mode provides capability to retrofit into non-digital sub arc applications.
• Excellent stick and Lift-Arc™ TIG performance.
• Arc control is active in the stick and solid-wire processes. It allows the operator to customize arc characteristics to match preference, electrode, and joint design from a softer arc with more fluid puddle to a stiffer arc with a more controllable puddle.
• Auxiliary power – 20 amps of 120 V power to run power tools—like grinders, chop saws, drills, and lights.